Sale!

Happymodel Bassline 2S 90mm 2 Inch Micro Toothpick FPV Racing Drone BNF with CADDX ANT 1200TVL Camera

SKU: HA1977906

$147.62$187.52

-32%
Shipping fast worldwide
  • Dispatch:Usually will be shipped in 24 hours
  • Shipping Time:Expedited Express 6-8 business days
  • Secure Payment:Paypal,VISA,MasterCard
Guaranteed Safe Checkouttrust pay
Happymodel Bassline 2S 90mm 2 Inch Micro Toothpick FPV Racing Drone BNF with CADDX ANT 1200TVL Camera
$147.62$187.52

Happymodel Bassline 2S 90mm 2 Inch Micro Toothpick FPV Racing Drone BNF with CADDX ANT 1200TVL Camera
Introduction:
Introduce the Bassline , inspired from Our team pilot Nathan Loopz . This idea was originally born in 2019, and today make it into a BNF.
Even though we have many excellent Micro Freestyle drones now days, but the Bassline’s performance is still the craziest.
Manual:
ELRS Version ; Frsky Version ; PNP Version
Features:
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
VTX Power up to 400mw
Support ELRS V3.0 (Need to upgrade firmware)
Powerful EX1103 KV11000 motors
CaddxFPV Ant FPV camera
Recommend battery (Not include):
2S 350mah/450mah/550mah/650mah , Battery tray size:Maximum support for batteries with a width of approximately 17mm and a height of approximately 13mm
Specifications:
Brand Name:Happymodel
Item Name:Bassline 2S 2inch Micro FPV toothpick droneWheelbase:90mmSize:115mm*115mm*40mm
Analog version Weight:40gram
Optional Receiver version:
2.4G ELRS SPI / SPI Frsky D8/D16 / SPI Flysky / PNP (without onboard receiver)
Spare parts specifications:

Motor Mode:EX1103 KV11000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter:?1.5mm
Motor Dimension(Dia.*Len):?13.5mm*15.5mm
Weight(g):3.8g
No.of Cells(Lipo):1-2S
Propellers Weight:0.88g
Material:PC
Pitch:2.3inch
Props Dia:52.17mm
Center Thickness:5mm
Center Hole Dia:1.5mm
Flight controller X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target:CRAZYBEEF4SX1280
X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target:CRAZYBEEF4FR
X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target:CRAZYBEEF4FS
X12 PNP V1.1 flight controller without onboard receiver Target:CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor:ICM20689 or ICM42688P(SPI connection)
Mount hole size:25.5mm*25.5mm
Power supply:1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
Built-in voltage detection
Built-in current sensor
Onboard 4in1 ESC Power supply:1-2S LiPo/LiPo HV
Current:12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Default Factory firmware:Z_H_30_REV16_7.HEX
Default protocol:DSHOT300
Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option:50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version:V2.0
RF Frequency:2.4GHz
Antenna:SMD antenna
Telemetry output Power:<12dBm
Receiver protocol:SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn٬t flash separately ExpressLRS firmware
Could flash FC firmware to support ExpressLRS v3.0 TX module
Onboard SPI Frsky D8/D16 receiver Version SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8/D16 model
Channels:8ch/16ch No ground interference ( Transmitter and receiver 1 m from the ground):200meter
Failsafe support
Onboard SPI Flysky receiver Version SPI BUS receiver Protocol:AFHDS-2A Channels:14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground):200meter Failsafe support
PNP Version
(without onboard receiver)
Full UART1 for external Receiver
Support CRSF/GHOST/SBUS/IBUS/DSMX protocol
IR1 pad(invert RX1) used for SBUS input
Onboard 5.8g OPENVTX Firmware version:OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power:0/RCE/25mw/100mw/400mw
Power supply:DC 5V
Current (5v):<650ma (400mw)
Caddx ANT 1200tvl camera Image Sensor:1/3′ CMOS Sensor
Horizontal Resolution:1200 TVL
TV System:NTSC or PAL
IMAGE:16:9 or 4:3
Synchronization:Internal
Electronic Shutter:PAL:1/50~100,000; NTSC:1/60~100,000
S/N Ratio:>52dB (AGC OFF)
Video Output:CVBS
Lens:1.8mm
Min. Illumination:0.001Lux@F1.2
Auto Gain Control:YES
WDR:Global WDR
DNR:3D DNR
Dimensions:14*14mm(with bracket to 19*19mm)
Wide Power Input:DC 3.7-1

Additional information

Weight 0.05 kg
Receiver: No selection

2.4GHz ELRS SPI, Compatible Flysky Receiver, Compatible Frsky Receiver, Without Receiver

Reviews

Write review “Happymodel Bassline 2S 90mm 2 Inch Micro Toothpick FPV Racing Drone BNF with CADDX ANT 1200TVL Camera”

Your email address will not be published. Required fields are marked *

Shipping Methods


Payment Methods

[contact-form-7 id="230e2c7" title="Wholesale Inquiry"]
Free Worldwide Shipping

On all orders above $50

Easy 30 days returns

30 days money back guarantee

International Warranty

Offered in the country of usage

100% Secure Checkout

PayPal / MasterCard / Visa

payment

Copyright © 2023 hobbyant.com All Rights Reserved.