23.5g Happymodel Mobula6 HDZero 65mm 1S SuperbeeF4 Lite Whoop FPV Racing Drone w/ HDZero Whoop Lite VTX HDZero Nano Lite Camera
Introduction:
Introducing Mobula6 HDZero, the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only!
We have been working on innovations of Brushless Whoop for a few years. Just like many of you, we are particularly eager to have a 65mm FPV whoop carrying HD VTX. Teaming with HDZero, Runcam, Nick Burns, Mr Shutterbug, Ryan Quellet and many other enthusiasts, here the dream comes true finally!
Specification:
Brand:Happymodel
Model:Mobula6 HDZero
Frame wheelbase:65mm
Weight:23.5 gram without battery
Size:80mm*80mm*50mm
Receiver option:
SPI ELRS 2.4GHz
SPI FRSKY 2.4GHz
Compatible with 1S Lipo battery or Lihv battery PH2.0 Plug ( NOT Included)
Flight controller SuperbeeF4 Lite ELRS/FRSKY |
SPI ELRS version Firmware target:CrazybeeF4SX1280 SPI FRSKY version Firmware target:CrazybeeF4FR MCU:STM32F411CEU6 (100MHz, 512K FLASH) Sensor:MPU-6000 or ICM20689 or BMI270(SPI connection) Power supply:1S Lipo Lihv battery input (DC 2.8V~4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in SPI Frsky/ExpressLRS receiver Built-in 5V 1A BEC Built-in voltage detection |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply:1S LiPo/LiPo HV (2.8v~4.35v) Currents:5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware:O_H_5_REV16_8.HEX Default protocol:DSHOT150/DSHOT300/DSHOT600 |
Onboard SPI ExpressLRS 2.4GHz RX ( ELRS 2.4G Version) |
Packet Rate option:25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency:2.4GHz Antenna plug:IPEX Telemetry output Power:<12dBm Receiver protocol:SPI ExpressLRS Could bind with ELRS V2.0 firmware TX module |
Onboard Frsky SPI D8 /D16 2.4GHz RX ( Frsky Receiver Version) |
SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt) Channels:8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground):100m~200m Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol |
Motor | Mode:EX0802 19000KV Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:??1mm Motor Dimension(Dia.*Len):??10.5mm*14.9mm Weight(g):1.7g No.of Cells(Lipo):1S only |
Gemfan 1219 Bi-blades Propeller | Weight:0.19g Material:PC Pitch:1 inch Props Dia:30mm Center Hole Dia:1mm |
HDZero Nano Lite Camera | Dimension:14x16x11mm Weight:1.5gram 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor Excellent low light performance Fov: 4:3:D:130?? H:108?? v:84?? 16:9:D:122?? H:108?? V:65?? |
HDZero Whoop Lite VTX | 1S Input 25mW/200mW RF Output-SmartAudio Support 25.5×25.5 M2 Soft Mounting- Antenna Retention Removable Shielding Box- 32.5×32.5mm(29x29mm inner) 4.5grams/4mm Thickness (without shielding) |
Package Included:
1x Happymodel Mobula6 HDZero FPV Drone
1x Spare Canopy
1x Screw driver
1x Propeller disassemble tool
Additional information
Weight | 0.2 kg |
---|---|
Receiver: No selection | Compatible Frsky SPI D8/D16 Receiver, ELRS 2.4GHz |
Reviews