Smart BMS 1A 2A 6A Balance Current 8S 17S 20S 24S JK BMS CAN 60A 80A 100A 150A 200A 600A Lifepo4 Li-Ion Battery Protection Board bluetooth APP
Descriotion:
Overcharge protection: | prevent overcharge and affect battery life |
Short circuit protection: | automatic protection during abnormal short circuit to prevent damage to the protection board and battery |
Short circuit protection: | automatic protection during abnormal short circuit to prevent damage to the protection board and battery |
Over-discharge protection: | prevent the battery from being dead and affect the battery life |
Over-current protection: | prevent current from exceeding the battery’s tolerance, causing battery damage |
Drop-out protection: | prevent the cable from being dropped or the contact is poor, and the battery loses protection |
Over-temperature protection: | prevent the battery temperature from becoming too high, causing spontaneous combustion or damag |
Instructions: | https://github.com/NEEY-electronic/JK/tree/JK-BMS |
BMS protocol: | https://github.com/syssi/esphome-jk-bms |
VenusOS driver: | https://github.com/Louisvdw/dbus-serialbattery |
NOTE: | BMS with current of 600A requires customers to purchase relays by themselves |
>>>LCD Display:Click here to open<<<
NOTE:
??:CANBUS interface (if you need CAN function, buy the JK-xxxxCAN version)
??:RS485 interface(At present, all JK BMS are configured with RS485 function by default, it needs to be implemented through the external support module)
??:LCD interface(Please check whether BMS has LCD interface before purchasing. If there is no interface, LCD cannot be used)
??:Heat Function interface(At present, the heating function customized by customers can be accepted, MOQ50pcs)
??:Temperature sensor
These ?٢ڢۢ? interfaces are on the BMS board.
However, ?٢? has no actual function, which requires additional customization.
?ڢ? There is no need to customize the BMS, just add an LCD module or an RS485 plug-in module.
??CAN function:YES, buy the JK-xxxxCAN version.
??RS485 function:buy another RS485 plug-in module and plug it into the GPS interface to use it.
??LCD function:buy another LCD module and plug it into the LCD interface to use it.
??Heating function:customized, and also need to purchase the matching CAN heating protocol charger. The charger can communicate with the BMS, and the charger must have a heating function. (Before placing an order, consult and customize in advance)
Note:??The GPS function requires the support of the local operator. Some regions or countries may not support it. Before placing an order, you need to communicate with us to confirm! ! !
Package Included:
1 x JK Smart BMS
Additional information
Weight | 0.42 kg |
---|---|
Model: No selection | JK-B1A20S15P, JK-B2A24S15P, JK-B2A24S20P, JK-B2A8S20P, JK-BD4A17S4P |
Reviews