Hantek DSO5102P USB Digital Storage Oscilloscope 2Channels 100MHz 1GSa/s
Feature:
200/100/70MHz bandwidths
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800×480)
Record length up to 40K
Trigger mode:edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
Model | DSO5102P |
Acquisition | |
Sample Rate | Real-Time Sample:1GS/s |
Acquisition Modes | |
Normal | Normal data only |
Peak Detect | High-frequency and randon glith capture |
Average | Wavefom Average, selectable 4,8,16,32,64,128 |
Inputs | |
Inputs Coupling | AC, DC, GND |
Inputs Impendance | 1M????2%0pF??3pF |
Probe Attenuation | 1X, 10X |
Supported Probe Attenuation Factor | 1X, 10X, 100X, 1000X |
Maximum Input Voltage | CAT I and CAT II:300VRMS (10??), Installation Category; CAT III:150VRMS (1??); Installation Category II:derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur. |
Horizontal System | |
Sample Rate Range | 500MS/s–1GS/s |
Waveform Interpolation | (sin x)/x |
Record Length | 40K |
SEC/DIV Range | 4ns/div to 40s/div |
Sample Rate and Delay Time Accuracy |
??50ppm(at over any ms time interval) |
Position Range | 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s |
Time Measurement Accuracy (Full Bandwidth) |
Single-shot, Normal mode:?? (1 sample interval +100ppm ?? reading + 0.6ns); >16 averages:?? (1 sample interval + 100ppm ?? reading + 0.4ns); Sample interval = s/div ?? 200 |
Vertical System | |
Vertical Resolution | 8-bit resolution, all channel sampled simultaneously |
Position Range | 2mV/div to 10V/div |
Bandwidth | 100MHz |
Rise Time at BNC( typical) | 3.5ns |
Analog Bandwidth in Normal and Average modes at BNC or with probe, DC Coupled | 2mV/div to 20mV/div, ??400mV; 50mV/div to 200mV/div, ??2V 500mV/div to 2V/div, ??40V; 5V/div, ??50V |
Math | +, -, *, /, FFT |
FFT | Windows:Hanning, Flatop, Rectamgular, Bartlett, Blackman; 1024 sample point |
Bandwidth Limit | 20MHz |
Low Frequency Response (-3db) | 0Hz at BNC |
Weight | 2.812 kg |
---|
Shipping Methods
Payment Methods
[contact-form-7 id="230e2c7" title="Wholesale Inquiry"]
Reviews