New ATU100 Automatic Antenna Tuner 100W 1.8-55MHz/1.8-30MHz With Battery Inside Assembled For 5-100W Shortwave Radio Stations
Type A:1.8-55MHz Automatic Antenna Tuner
Features:
– 0.96-inch OLED display
– Frequency 1.8-55 MHz
– Power supply voltage range:10-15V DC
With Lithium battery
– Maximum current consumption:300 mA
– Maximum working power:100W
– Maximum possible measured power:150W
– 1W:It is necessary to start setting the minimum power
– Minimum possible measured power:0.1W
– Step for measurement on powers under 10W:0.1W
– Step for measurement on powers above 10W:1W
– Power measurement accuracy:10%
– Specified maximum inductor:8.4 uH capacity
– The minimum installation step of inductor:0.05??H
– Maximum installation capacity:1870 pF capacitor
– Minimum installation step:10 pF
Package Included:
-1 x Automatic Antenna Tuner with Shell
>>Manual(click to download)
Note:The product is assembled and with shell.
Type B:1.8-30MHz Mini Automatic Antenna Tuner
Note:
It is assembled and ready to use.
– The device does not consider its own efficiency.
– Supply voltage is 5V standard voltage.
-This Tuner can install battery inside,if you need battery,please choose the one with battery
CGJ-100 1.8-30MHz Mini Automatic Antenna Tuner 0.91′ OLED Display For 5-100W Shortwave Radio Stations
– CGJ-100:For high-power shortwave radio stations using 5-100W.
Features:
– Mini short-wave automatic antenna tuner.
– TYPE-C charging interface, M connector.
– With a 0.91-inch OLED display.
– This antenna tuner is automatically tuned and does not require any control wires, suitable for most radio stations.
– The device contains a set of 7 capacitors and 7 inductors, which allows it (with the largest configuration) to work effectively in a wide frequency band, overlapping 1.8-30MHz amateur radio HF band.
Specifications:
– Power supply voltage:USB charge and discharge
– Maximum current consumption:400ma
– Maximum working throughput:100W
– Maximum possible measurement power:150W
– Minimum power required to start tuning:5W
– Minimum possible measurement power:0.1W
– Measurement steps for power up to 10W:0.1W
– Measurement steps for power higher than 10W:1W
– Power measurement accuracy:10%
– Maximum installation inductance:8.53uH
– Minimum installation inductance step size:0.05uH
– Maximum installation capacitance:1869pF
– Minimum installation capacitance step:10pF
– 4pcs panel buttons:POW, BYP, AUTO and BOT function
– Display:0.91′ OLED
Package Included:
– 1 x Automatic Antenna Tuner
>>Manual(clik to download)
Tyep C:Without shell (PCB Board + Screen)
Specifications:
Power supply range:10 – 15 VDC
Max current:450mA
Max working power:100 watts
Max measured power:150 watts
Minimum power for tuning start:1 watt
Recommended maximum power while tuning not above 30 watts. (after tuning you can set 100 watts and work on this power)
Minimum measured power:0.1 watt
Step for measurement on powers under 10 watts:0.1 watt
Step for measurement on powers above 10 watts:1 watt
Power measurement accuracy:10%
Maximum inductance set:8.5 uH
Minimal step for setting inductance:0.1 uH
Maximum installed capacity:1870 pF
Minimal step for setting capacity:10 pF
100 Watts tuner, 7×7 (7 capacitors x 7 coils) based on PIC 16F1938.
Dimentsion – 120 mm x 62 mm.
>>Type C Wiring instructions
Package Included:
1 x PCB board
1 x LCD screen
1 x Dupont cable
Note:not included battery
Details picture:
Additional information
Weight | 0.3 kg |
---|---|
The Type: No selection | A, B, C |
Reviews