[US Direct] Cloudenergy 12V 150Ah LiFePO4 Deep Cycle Battery 1920Wh 1280W Built-in 100A BMS Perfect for RV Solar Marine Perfect Replace Most of Backup Power and Off Grid Applications CL12-150

[US Direct] Cloudenergy 12V 150Ah LiFePO4 Deep Cycle Battery 1920Wh 1280W Built-in 100A BMS Perfect for RV Solar Marine Perfect Replace Most of Backup Power and Off Grid Applications CL12-150
Description:

Features:
?10-year life & 3000+Deep Cycles?
Cloudenergy 150ah LiFePO4 Lithium Battery contains 3000+ deep cycles, each lithium battery can run for more than 10 years, which is 3 times longer cycles than other AGM batteries on the market. And our lithium-iron batteries can maintain 80% capacity after 3000 deep cycles.?Application?
The150Ah Lithium Iron Phosphate Battery has 1920Wh Energy, and can be expanded to 30.7kwh by wired in 4S4P, Perfect for trolling motor, RV, campers, marine, travel trailer, solar power system, motor homes, UPS, off-grid etc.?Safer Metal Shell Design?
Explosion valve and matal steel shell design protect it from fire and explosion. And it has a more stable built-in 100A BMS to protect it from overcharge, over-discharge, charge over-current, discharge over-current, short-circuit, cell voltage self balance, high-temp discharge cut off.?Lighter but More Power?
Our LiFePO4 Battery has compact size design, which makes it smaller in size and 1/3 the weight of the lead acid battery at the same capacity, much more convenient for you to remove and place it.
Package Included:
1 x LiFePO4 Battery Pack
1 x User Manual
FAQ:
Q1:When I get the battery for the first time, does the battery need to be chargedA:There is only 50% charged when you get the battery. You need to fully charge the battery.Q2:How to charge the batteryA:Scheme 1:You can use a lithium iron phosphate 4-string (14.6V) charger to charge the battery pack.Scheme 2:You can use photovoltaic solar panels to charge the battery through MPPT.Scheme 3:You can use the inverter to charge the battery pack (note:the inverter needs a built-in AC to DC charging function)Q3:How do I connect the lifepo4 battery in series or in parallelA:1. Please use 14.2~14.6V charging voltage to fully charge all lifepo4 batteries individually;2. Connect your batteries one by one in parallel, and leave them together for 12~24 hrs to automatically balance the voltages of two adjacent batteries.And then, you can connect your batteries in series or/ and in parallel.Note:The voltage must be consistent, allowing difference within 100 mV.Q4:How to activate the battery when BMS cut it off for protectionA:If the BMS has cut off the battery for protection, you need to cut of the load of the battery and put the battery aside for 30 mins.Then the battery will automatically recover itself to normal voltage and can be used after fully charged.

Additional information