LY-EH005 10S 36V 20A 30A BMS Battery Protection Board Waterproof BMS For Rechargeable Lifepo4 Lithium Battery E-Bike E-Scooter With Balance Function
Specifications:
| Continuous Current | 20A | 30A |
| Overcurrent Protection Value | 37.5??7.75A | 62.5??6.25A |
| Charging Overcurrent Protection | 15??3.75A | 25??6.25A |
| Product Size | 77mm*65mm*10mm (Long*Width*Thick) | |
| Self Consumption | <80UA (Weak Electric Switch Version) | |
| Weak Electric Switch (Optional) | Close:Switch Activation/Turn On Discharge:Turn Off Discharge | |
| Overcharge Protection Detection Voltage | 4.250 ?? 0.025V | |
| Release Voltage | 4.125 ?? 0.025V | |
| Detection Delay | 800-1200ms | |
| Overdischarge Protection Detection Voltage | 2.8 ?? 0.03V | |
| Release Voltage | <3.0 ?? 0.3V | |
| Low Temperature Protection | -20 ?? 4 ?} | |
| High Temperature Protection | 70 ?? 4 ?} |
Features: 20 Ah, 30 Ah
– 36V 20/30A BMS is used for 10series 36V battery pack.
– BMS manufactured by high quality Mos and IC imported . Keep your battery long cycle serivce life time
– Use top quality (A-level) protective integrated circuit IC.
– Use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
– IC itself has power balancing function. The circuit is simple and reliable.
– Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged.
– Over current and short circuit protection function is very reliable.Long time short circuit of the load won??t affect the PCB and the battery.
– Temperature protection during charging and discharging.
Additional information
Weight
0.09 kg
Battery Capacity: No selection
Reviews
There are no reviews yet.