iFlight Nazgul5 Evoque F5 F5X V2 Squadshed X Analog 6S 5 Inch FPV Racing Drone w/ BLITZ MINI F7 E55 ESC 1.6W VTX
Notice:It is upgrade into new V2 Version. ( April 6th, 2023. Beijing Time)
Diffirence:
– New F5X V2 frame ( Like pohotos showed)
– BLITZ Whoop 1.6W VTX
Features:
Smooth and Powerful XING2 Motors
The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection.
Latest Nazgul Frame for Maximum Protection
The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortvuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.
Secured Battery Plug with Anti-Spark Filter
Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We??ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.
Specifications:
Product Name:Evoque F5 V2
FC:BLITZ Mini F722 Flight Controller
ESC:BLITZ Mini E55 4-IN-1 2-6S 55A ESC
Video Transmission:BLITZ Whoop 1.6W VTX
Frame wheelbase:225mm (Squashed X)
Motor:XING2 2207 motors
Prop:Nazgul 5 inch propellers
Weight:445grams
Takeoff Weight:Approx. 610 g
Dimensions (L?GW?GH):190?G136?G36 mm
Diagonal Distance:225 mm
Max Speed:130 Km/h (Manual Mode)
Maximum Takeoff Altitude:5000 m
Max Hover Time:Approx. 8 mins
Maximum Flight Distance:5 km
Max Wind Speed Resistance:100 Km/H (Level 5)
Operating Temperature Range:-10?? to 40?? C (14?? to 104?? F)
Antennas:Single Antennas
NO GPS
BLITZ MINI F7 Flight Controller | – MCU:STM32 F722 – Gyro:BMI270 – Baro:DPS310 – OSD:IFLIGHT OSD ??AT7456E?? – BEC:5V 2.5A – BlackBox:16MB – Uart:5*UART(UART1?yUART2?yUART3?yUART4?yUART:6) – UART1 for VTX HD/Analog – UART2 for Receiver – UART3?yUART4 for GPS or other sensors that require a serial port – UART6 for ESC Telemetry – 1?GI2C – 1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM ??5V/BAT/G/VO/T1/R1 /5V/G/VI?? – 1xSH1.0 8pin connector for ESC??R6/CUR/M4/M3/M2/M1/BAT/G) – 1xSH1.0 6pin connector for Any Receiver or DJI??3V3/R2/5V /G/R2/T2?? – 1xSH1.0 4Pin connector GPS (T4/R4/G/5V) – 1xSH1.0 4Pin connector LED & Beeper (BUZ/LED/G/5V) – 4?G0402 LEDs for FC STATUS (3.3V Red) / (Start Blue) / (5V Green)/??BAT Orange?? – Smartaudio & IRCTramp VTX protocol supported – WS2812ledStrip:Yes – Bepper:Yes – Firmware:IFRC-IFLIGHT_BLITZ_F722 – Outer Size:30.5*27mm / 20*20mm ??4 mounting – Weight:5.0g |
BLITZ Mini E55 4IN1 ESC | Input:2-6s LiPo Constant:55 Amps (per channel) MCU:BB21 Burst:60 Amps (per channel) BEC:No BlHeli32 telemetry:Yes Dimensions:42*35mm Mounting Holes:20*20mm ??3mm with Grommets ??2mm Weight:11.3g Target:QH-50 16.7 |
BLITZ Whoop 1.6W VTX | Input voltage:7V?F34V Interface:MMCX Power levels:PIT/25mW/400mW/800mW/1600mW Channels:40 (including Raceband) Mounting pattern:30.5×30.5mm/??3 Lightweight:18.9g (excluding antenna) VTX telemetry:IRC Tramp Betaflight IRC Tramp Configuration:Please download the attached VTX table for Betaflight! RC Tramp VTX table values:25mW/400mW/800mW/1600mW |
Package Included:
– 1 x Nazgul Evoque F5 V2 Analog (Squashed X)
– 4 x Nazgul 5 inch Props
– 2 sets of Battery pads
– 2 x Battery straps
– 1 Screw bag
Additional information
Weight | 0.8 kg |
---|---|
Receiver: No selection | TBS Crossfire Nano RX, Without Receiver |
Reviews