Adjustable Potentiometer Rotary Angle Sensor Module
Description:
Rotary Angle Sensor is based on the 10k the adjustable potentiometer knob Angle sensor module, the output is 0 ~ VCC simulation values, the output voltage will be as the potentiometer rotation Angle and linear changes. Apply to 3.3 V and 5 V of the SCM system, and the board are compatible. Especially suitable for the volume regulator, such as lighting regulator DIY project
Feature:
Easy to use
Electronic building blocks Interface
Power supply is 3 ~ 5.5VDC
4 M2 screw positioning holes for easy installation
Parameter:
Item | Minimum | Typical Value | Maximum | Unit |
VCC | 3 | 5 | 5.5 | V |
VOUT | 0 | N/A | VCC | V |
Rotation Angle | 0 | N/A | 280 | Deg |
Size | 24 x 29 x 27 | mm | ||
Weight | 8 | g |
Interface:
Control Interface:GND to ground, VCC power supply, SIG is the signal output pin.
Knob Potentiometer:10K ohm linear adjustable potentiometer, add aluminum knob cap.
Positioning holes:4 M2 screws positioning holes with a diameter of 2.2mm, easy to install, implement the module combinations.
http://img.staticbg.com/file/products/20141126005847Rotary%20Angle%20Sensor%20Schematic.pdf
Package included:
1 x Rotary Angle Sensor
Additional information
Weight | 0.006 kg |
---|
Reviews