AC220V 7g/h Quartz Tube Type Ozone Generator Kit Industrial Water Ozone Generator for Hospitals Ozone Generator
Description:
Input Voltage:AC200V-AC240V
Power:70W
Disinfection:For air or water
Colling method:Oxygen source(98%)
Oxygen flow:1L/min
Ozone concentration:75mg/L
Ozone output:4.5g/h
Inlet:We recommend that you use 4*7mm silicone tube or 5*8mm PU tube.
Outlet:We recommend that you use 6*8mm Teflon tube.
Product introduction:
Product name:Quartz tube type ozone generator Kit
Cooling way:Air cooling
Gas source:Air source, oxygen source
Gas pressure:<0.2Mpa (200kpa)
Environment:<40 degrees Celsius, <85%RH
Temperature rise:<8 degrees Celsius
Heat dissipation effect:Increase 1.6 times
Ozone concentration:Increase 10%-15%
Inner electrode:316L stainless steel tube
Product application:Air purification and water sterilization
Service life:More than 20000 hours
Low temperature rise, high efficiency, moisture-proof, low-voltage protection, over-voltage protection, over-current protection, over-heat protection, open-circuit protection, short-circuit protection, automatically stabilize the output power.
Installation requirements:
We recommend that you install the ozone tube on the insulating board. If you want to install it on a metal shell, we recommend that you connect a ground wire to your metal shell.
You can use long screws to install the ozone PSU (ozone power supply, circuit board) away from the ozone tube (metal shell or other electrical appliances) more than 4cm. (Front, back, left, right, up, down)
Package included:
1 x AC220V 7g/h Quartz Tube Type Ozone Generator Kit
Additional information
Weight | 1.012 kg |
---|
Reviews