KTNNKG 4PCS DC 5V12V24V Single-channel Receiver Remote Control Switch Access Control Module with Voltage Output

KTNNKG 4PCS DC 5V12V24V Single-channel Receiver Remote Control Switch Access Control Module with Voltage Output
Specification:
Model:KG1201E
Type:Single remote control switch
Working voltage:DC5v/ 12v /24v available
Working frequency:433MHZ
Total load power:240W
Remote control distance:30-50M
Working temperature:-15~75??
3C rated voltage range:above 440V
Remote control distance:30-200M
Scope of application:access control controller, anti-theft alarm accessories
Package included:
1 x Remote control(YK-A4)
4 x Receiver(KG1201E)
1 x English manual
Learn to code:
1. Jog learning method:
Press the code matching button on the control panel once, and the LED indicator will flash once. After the LED indicator lights up, press the remote control button that needs to be coded. The control panel LED indicator flashes 3 times in succession and the code matching is successful.
2. Self-locking learning method:
Press the code matching button on the control panel twice, the LED indicator flashes 2 times. After the LED indicator lights up, press the remote control button that needs to be coded, and the control panel LED indicator flashes 3 times in succession.
3. Interlock learning method:
Press the control panel pairing button 3 times in succession, the LED indicator flashes 3 times, after the LED indicator lights up, press the remote control button that needs to be paired, the control panel LED indicator flashes 3 times in a row, and the code pairing is successful.
4. Learning method with a delay of 10 seconds:
Press the code matching button on the control panel 4 times, the LED indicator flashes 4 times. After the LED indicator lights up, press the remote control button that needs to be coded, and the control panel LED indicator flashes 3 times in succession.
5. Learning method with a delay of 30 seconds:
Press the control panel pairing button 5 times in a row, and the LED indicator will flash 5 times. After the LED indicator lights up, press the remote control button that needs to be paired. The control panel LED indicator flashes 3 times in a row and the code is successfully matched.
6. Learning method with a delay of 90 seconds:
Press the code matching button on the control panel 6 times continuously, and the LED indicator will flash 6 times. After the LED indicator lights up, press the remote control button that needs to be coded, and the control panel LED indicator flashes 3 times in a row, and the code matching is successful.
7. Learning method with a delay of 120 seconds:
Press the code matching button on the control panel 7 times, the LED indicator flashes 7 times. After the LED indicator lights up, press the remote control button that needs to be coded, and the control panel LED indicator flashes 3 times in succession.
Wiring instructions:
1. +:Connect to the positive pole of the power supply;
2. -:Connect to the negative pole of the power supply;
3. NO:output terminal; normally open terminal of the relay;
4. COM:output terminal; relay common terminal;
5. NC:output terminal; normally closed terminal of the relay;
6. The input voltage supports 5v/12v/24v.
Clear data:
After pressing the learning button on the control panel 8 times in a row, all the remote controllers that have learned the code will be automatically cleared. After clearing, the remote control that has previously learned to code will no longer be controlled.
Explanation of output mode:
1. Self-locking:Press the same remote control button, press it once, the relay is turned on, and press it again, the relay is turned off.
2. Interlock:Press the ‘A’ button on the remote control to turn on the relay, and press the ‘B’ button on the remote control to turn off the relay.
3. Jog:Press the ‘A’ button on the remote control to turn on the relay, and release the ‘A’ button on the remote control to turn off the relay. If you keep pressing the ‘A’ button of the remote control, the relay will always be on. When you release the remote control, the relay will be off.
NOTE:
1. Do not operate with electricity, turn off the power supply for operation, and turn it on after the test is confirmed to be correct.
2. When the remote control voltage is low, please replace the battery in time (when the remote control battery voltage is low, the remote control distance will generally become shorter).
3. When using wireless electronic products, pay attention to avoiding metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, and avoid the short distance between the remote control and the receiving device or the failure of normal operation.
4. Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product. In severe cases, it will damage the product and bring hidden dangers to your safety.

Additional information